This is a basic harness option to get most cars with canbus ecus running. Please note the lengths of each branch of the harness and check they will suit your application. Also note the functionality of the branch. This does not cover full TurboLamik features, but you can also add something to this harness if needed or ofcourse repurpse, by repining the main connector.
We are hoping these dimensions will suit most vehicles with minimal modifications. We have made the assumption its much easier to shorten the harness branch than extend them.
Picture as a guide not actual harness
| Branch Function |
Wire Length |
| TCU to Transmission |
1800mm |
| TCU to Shift Selector |
1800mm |
| Shift Selector Type |
BMW 10 Pin |
| TCU to Display |
1800mm |
| TCU to Program Switch |
1800mm |
| TCU to Ground |
1800mm |
| TCU to Power Supply |
1800mm |
| TCU to Ignition |
1800mm |
| TCU to Engine CAN |
1800mm |
|
TCU to Foot Brake Signal
|
1800mm
|
| TCU to Shift Paddles (ground signal) |
1800mm |
|
|
